Getting there...

[saltydog]

That's exactly what my wife asked me! No I am not peeing in the sink. Otto wanted a full shot of the floods and the CSC logo. Ah, the humiliation. I think we can mercifully end this thread. [img]images/icons/grin.gif[/img]

[SECF3114M73J]

Otto, what's the height of your transom? Curious about the notch in the center.

[ocuyler]

SECF,

The center "notch" sets up for a 25" motor, the outer parts can be used for mounting 25" twins. There's 5" difference between the 2.

Otto

[ScottM]

Otto,
Your transom looks like mine, only mine isn't supposed to be notched. The previous owner cut it down 5" to fit a 20" engine. When we repower (hopefully this fall) we're going to build the notch back up so the transom is back to the original 25".

[SECF3114M73J]

Otto that's a good idea. Probably help keep the slop out also.A freind just redid the transom on his 23, since he was repowering he raised the transom for a 30" shaft.

[ March 29, 2003, 10:45 AM: Message edited by: SECF3114M73J ]

[ocuyler]

SECF,

Frankly, I'm only assuming that the transom is the factory configuration. But, since 25" is the standard motor, this makes sense. There's a pretty big splash well that drains and well as a transom gate:

[Finster]

Otto, you get the inside sprayed this weekend? The weather here was too sloppy for me to do any thing.