Rub Rail

[strick]

Strick,
Looks nice! Did you have fun bending
the stainless around the stern corners [img]/images/graemlins/grin.gif[/img] [img]/images/graemlins/grin.gif[/img]
Did you use the 3/4 or 1"? Chris

It's 3/4 inch. we used some clamps to help hold it in place as close to the corner as we could then we started to make the bend by hand and pounded with a hammer on the ss insert while it was wrapped in a towel and slowly bent it around the cornar. There really needs to be thick fiberglass at the corners for the screws to bite into.

Strick