Center console cabinet door replacement?

[kmirise]

I'm looking for suggestions on replacing the cabinet door on the helm side of the center console on my '85 23. The opening is 29 3/4 wide and 22 1/2 inches tall. Is there a manufucturer that makes pre-made doors that I could use? I'm open to suggestions on the best material to use too? Maybe starboard for the low maintenance? Teak for looks?
Thanks in advance!

[NOAHSARK]

WHATS UP WR, MY 20'CC HAS STARBOARD DOORS. I LIKE THE FACT THAT THEY ARE LOW MAINTNANCE AND VERY DURABLE. I WILL TAKE SOME PICS OF MY SETUP SO THAT YOU CAN HAVE AN IDEA OF WHAT IT WILL LOOK LIKE [img]/images/graemlins/wink.gif[/img].

[kmirise]

I'm still looking for doors if anybody has a good suggestion? Maybe the OEM part would fit from a current model SC or Regulator or Mako or something?? Anybody tell me where I can look?

I'd do something used, too, if somebody has one to part with that looks decent?

Thanks.

[Scott]

This manufacturer was just posted by another member in another thread

Looks like they do custom work

A friend of mine had some hatches made by someone in FL (I think) He's real happy with the work ... I cant offer an opinion as I have not seen them yet. I'll see if I can find the link for you

[captj2]

I constructed a starboard frame holding 2 sliding doors made from plexiglass for my 20'. Each door slides to give access to almost 1/2 of the consol and can be instantly removed for full access. I also installed a starboard panel in the consol to mount the electrical panel, radio and all switches out of the spray.

[kmirise]

I constructed a starboard frame holding 2 sliding doors made from plexiglass for my 20'. Each door slides to give access to almost 1/2 of the consol and can be instantly removed for full access. I also installed a starboard panel in the consol to mount the electrical panel, radio and all switches out of the spray.

That sounds like a great solution, and I'd be happy to have something like that. I just don't have the time and skills to do a quality job, so I've been looking for a commercial solution. I sent a request for a bid off to the manufacturer Scott mentioned.