![]() |
|
#1
|
|||
|
|||
![]()
I would leave about an inch and a half . Circular saw is the fastest and the set back from the side to the blade is an inch and a half. set the blade for cutting a little less than a inch and it should cut right through. If you cut the flange too cloose or cut it off , the liner is going to become flimsy and a huge pain in the ass to work with.
__________________
36' Yellowfin 1972 20' seacraft 140 suzuki http://www.classicseacraft.com/commu...ad.php?t=18607 |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|