![]() |
#1
|
|||
|
|||
![]()
Hopefully starting in April I am planning on doind a few small projects on my familys 23 foot 1984 seacraft center console. I do have some questions though, how do you: restore teak, clean/polish fiber glass, and what do you use to clean stainless? Lastly is it possible to save a console window that has crystalized? We will also be having this icom m504 radio installed,
![]() Arioch ![]() |
#2
|
|||
|
|||
![]()
Any one?
|
#3
|
|||
|
|||
![]()
I do have some questions though, how do you: restore teak,
Teak: The last time I did it I sanded (thoroughly) and applied 3 coats of Sikkens Cetol. It lasted about 2 years in southern SC sun. clean/polish fiber glass,Meguires and others have complete systems for this. Bring on the elbow grease ![]() and what do you use to clean stainless? A phosophoric acid solution (Mary Kate on/off) will remove the rusty looking stains left from SS. The metal itself if not too bad can be brought back with a mild abrasive made for fiberglass...Meguires restore and wax or similar. Again, bring on the elbow grease. Lastly is it possible to save a console window that has crystalized? replace it. We will also be having this icom m504 radio installed, Excellent radio. I have it also. Wire it to your GPS for DSC and emergency signaling. Post some pics!! Good luck!! |
#4
|
|||
|
|||
![]()
Sikkens Cetol, is this teak oil or varnish? It will be wired to the gps, also how do you register the dsc? Here she is,
![]() No more pics until this snow melts (we are having a noreaster as we speak)right now she is sleeping nicely in the garage in chealsea ma. Till then dont worry because when i start you guys will have pictures and videos.Thanks! Arioch ![]() |
#5
|
|||
|
|||
![]()
__________________
we need a lifeguard at the gene pool |
#6
|
|||
|
|||
![]()
Thanks
Arioch |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|