|
|
|
|
#1
08-19-2011, 10:29 PM
|
|||
|
|||
Re: 20ft scuppers
Ping pong scupper? I understand the ball plugging the drain when the water pushes it up. Simplest version of a check valve. Sounds like this is the least work for the scuppers at the water line problem. Anyone have a link to buy them?
__________________
1974 Seacraft 20' SF with 1985 Evinrude 150 VRO 1987 Seacraft 23' Scepter with 2007 250 HP Evinrude Etec 
|
|
#3
08-19-2011, 10:36 PM
|
|||
|
|||
|
Re: 20ft scuppers
They will only work if the ball is OUT of the water the majority of the time. If there isnt enough pitch from under the deck out to the transom (or if it ends up below the water line) than its not even worth doing.
http://www.rabud.com/SCUPPER-FLYER-small.pdf
__________________
Patrick from WAY out on cape cod. 1973 23foot Center console, Birdsall Ttop, Hermco Bracket... in progress
|
|
#4
08-19-2011, 11:43 PM
|
|||
|
|||
|
Re: 20ft scuppers
Light motors and dedicated pumps keep them dry.
My Slacker has factory mods from some who came before me and were smarter than I. Merritt boys? Don`t know. Weights and measures are key here. Think light and CG. Cheers, GFS
|
|
#5
08-20-2011, 09:29 AM
|
|||
|
|||
|
Re: 20ft scuppers
the ball style do not work as I imagined, time for some waterline measurements and a chalk line I suppose
__________________
1974 Seacraft 20' SF with 1985 Evinrude 150 VRO 1987 Seacraft 23' Scepter with 2007 250 HP Evinrude Etec
|
|
#6
08-20-2011, 01:59 PM
|
|||
|
|||
|
Re: 20ft scuppers
Could there be a problem with my set up? I havnt had the boat in the water yet. Perhas the crises hoses is a petter idea.
|
|
#7
08-20-2011, 08:31 PM
|
|||
|
|||
|
Re: 20ft scuppers
My MA has them going down to below and exit under the hull not to the transom I wonder how that's going to work? Easy enough to plug them up if needed.
Can others chine in on this?
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
