And away we go...

[CHANCE1234]

Guys I really need some help,regarding my previous posts.

1. Old deck sat on 3/4 inch potter putty back aft but sat on stringers up front. Raised stringers 2 1/4 inches with plywood. This only raised the back deck about 11/2 inches when finished. Do all 20s decks sit flush on stringers up front but above stringers aft? Should I shim back aft to raise it a true 2 1/4 inch?

2. I have searched all forums regarding filling scuppers permanently to bring them out the stern but I can't find a good step by step description. Do I just fill with epoxy? Do I put glass on the bottom of the hull and epoxy? Etc...

Thanks for any help. I'm at a stand still until I can get these two figured out.