|
|
|
|
#1
12-11-2012, 11:15 PM
|
|||
|
|||
My seats measure 22" across by 16" deep.
|
|
#2
12-15-2012, 09:53 PM
|
|||
|
|||
|
Finally got the holes filled and some more glass and resin so I started on the console again. Hopefully I get a lot done during Christmas vacation.
|
|
#3
12-16-2012, 06:32 PM
|
|||
|
|||
|
Quote:
__________________
there's no such thing as normal anymore...
|
|
#4
12-17-2012, 05:19 PM
|
|||
|
|||
|
My tank from sunrise arrived today. It is exactly as I wanted it size and fitting locations are perfect. Thank you so much Tony.
 
|
|
#6
12-17-2012, 10:56 PM
|
|||
|
|||
|
Thanks Don, I just hope it's not to far forward. I only have a 2 stroke 115 on the back. And I plan on putting two batteries under the console as far forward as possible. The tank comes back to just aft of the aft end of the console so hopefully it will sit okay when drifting or idling to get any water out. The tank is 49 gallons, it is perfect for what I'll be doing. Near shore stripers and chasing bluefin on the good days east of Chatham. I finished glassing the console and ordered some fairing compound from Mertons to test out. I am not going for showroom/strick condition but decent for a rookie. Now I have to find some plastic strips to 5200 to the bottom of the tank. Anyone know where to get anything like that that won't corrode the tank? I'll get some pictures after I try the fairing compound. What grit do you recommend for the fairing compound, 220?. She's coming along, I'll have to start filling all the holes on the cap soon too. I think I may be having to much fun working after work. I do enjoy all the little battles won and making my brain work at something I've never done before.
|
 |
|
|
Hybrid Mode
