Boondoggle build 75 inboard

[Petey]

Attachment 23525

Originally Posted by Surfnski

How difficult was it getting that liner separated from the hull and out in one piece? I could see that being a challenge, especially if it were bonded together well around the perimeter.

It was kind of tough to get out. I used wedges that were 3 to 5 feet long and were 6’’ tall. I spend a few day looking at every seacraft inboard model they made. I found this one build and looked at were the potter putty was. You can see the bow of the boat was cut. I had to send the wedge down the bow to separate the two. Also there was putty between the well and keel which my well got broken but i fixed that.