dry weights new 23cc vs old hulls

[John R]

Yo Otto - this winter I'm going to build an 8' Graphite Spinning Inshore rod - Fuji Seats & Guides, over/under wrapped, CS Logo on the butt section if I can get it to work right - or maybe a conventional boat rod - and donate it to the site for an auction or raffle (or Trayder can fish with it [img]images/icons/rolleyes.gif[/img] )... How's that?

[Jon G]

A CS logo rod? Now your talking put me on the list!

[CapeGuy]

I was referred to this site by a friend who told me he had seen a post about Metan. A lengthy conversation about Metan had ensued a few days earlier and he was quite appalled by what i had to say about the quality of the work. I fish a 23' with a 225 yamaha outboard out of stage harbor and he thought my input might be of import to anyone considering bringing their seacrafts up here because i was going to have a rebuild done by the guy and am glad i didnt. A board troll, ive never heard that. I was just giving some "been there done that knowledge" for you guys and if you doubt it, bring your boat up here and deal with his hassle; but be advised that someone told you first.

[ocuyler]

Cape Guy,

So advised. Now get over it, please.

[John R]

Understood (a bit better)...

So did you have a rebuild sone or are you still looking into having it done/doing your self?

Seriously, welcome aboard...

[CapeGuy]

Well look at that Johnny... it seems this post has dredged up another unhappy customer! Go take a look see... http://www.classicseacraft.com/cgi-b...c;f=1;t=000019
And this guy has first hand knowledge, his boat is on the website...

[John R]

Capeguy - I fold my cards, you're right, I'm wrong. I don't know what else to say [img]images/icons/rolleyes.gif[/img] but I'm really over it now. I found a way to get passed it.

OK, let's try this again, welcome to the site, how the hell are ya? [img]images/icons/tongue.gif[/img]