Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 12-05-2002, 02:32 PM
Briguy Briguy is offline
Senior Member
 
Join Date: Apr 2002
Location: Sarasota, Fl
Posts: 976
Default Re: "Dream" Power for a 23?

My answer, a 260hp Yanmar inline 6. Before I bought my twin 115 suzi's, I got estimates and performance #'s for a 260(then called a 250) Yanmar. To fill the transom and mount the engine with a jackshaft to a bravo 1 the cost was estimated in the $26,000 range. Top spead was est at 46-47 mph, 4.0mpg at low cruise of 23kts or 6.6 gph and about 30kts cruise at 9 gph for 3.8mpg. We were going to build a custom helm seat that would house the motor and still leave the center console free and the stern open. I chose the Suzuki's because the cost was 14.5 for the pair installed. I get about 2.8mpg at 27kts and 4200 rpm's. Perhaps when I get this bracket project over I will pick up a little speed and/or mpg. If I had to do it over again, I would do it the same.
__________________
Capt. Brian

Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:27 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft