Fuel Tank Support

[FELLOW-SHIP]

Ha Strick
I also went with ¾” marine plywood with lamination on both sides. I almost had a problem that I thought I would worn you about. By increasing the thickness of ¼” with glass lamination and by placing the gas and air filler 90 degree pipe approx at the same location as the old tank I had a very tight fit of the deck on top of the tank. The guy that made the tank for me made those 90 degree gas fill a little too high and my top deck would have rubbed against it. I was going to put a air vent in anyway so I decided to put my air vent right on top of the 90 degree filler hose locations just to be safe.
FellowShip [img]images/icons/cool.gif[/img]