Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-02-2002, 04:05 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Adding fuel senders

HA BARNICLEGIRL
I WOULD GO ANOTHER WAY ALL TOGETHER SOUNDS LIKE LOTS OF WORK TO PUT 4 SENDING UNITS IN FOUR TANKS. HOW ABOUT BUYING ONE FUEL MANAGEMENT SYSTEM THAT TELLS YOU HOW MANY GAL. YOU BURN AND INSTALL IT AFTER THE GAS / WATER FILTER AND BEFORE THE MOTOR. THAT WILL TELL YOU HOW MANY GAL PER HR, MILES PER GAL, AND GAL USED PER TRIP WILL GIVE YOU LOTS MORE INFO AND JUST ONE CUT THROUGH THE FUEL HOSE FOR THE TRANSDUCER AND A GAGE. PLUS ABOUT $200.00 STANDARD FF41 I BOUGHT ONE.
FELLOW-SHIP [img]images/icons/wink.gif[/img]
Reply With Quote
  #2  
Old 05-02-2002, 04:08 PM
BarnacleGirl BarnacleGirl is offline
Junior Member
 
Join Date: May 2002
Location: Boston, MA
Posts: 9
Default Re: Adding fuel senders

Thanks for the welcome! Yeah it made no sense to me either, no senders - if there's a place in the tanks for them it's news to me - good news! I'll check it out, sounds like it'd save a lot of work...
the boat's an '84. the center tanks are 55 gallons, the afts are 25. and the previous owner said he used about 5 gallons/hour trolling... I'm trying to get my ducks in a row for offshore.
-BG
Reply With Quote
  #3  
Old 05-02-2002, 04:14 PM
BarnacleGirl BarnacleGirl is offline
Junior Member
 
Join Date: May 2002
Location: Boston, MA
Posts: 9
Default Re: Adding fuel senders

FellowShip - I love this idea! [img]images/icons/grin.gif[/img] exactly what I'm looking for. do you know where I can get one of these? any installation tips I can learn from your experience?
do you leave all valves open all the time or just run off the front tanks?
Thanks!
Reply With Quote
  #4  
Old 05-02-2002, 04:49 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Adding fuel senders

HA BARNICLE GIRL
http://www.standardhorizon.com/ GO TO INSTRUMENTS AND THEN LOOK UP YOUR INFO ON THE FF41. YOU CAN GET THEM AN ANY GOOD MARINE STORE. MAKE SURE YOU CHECK INTO THE 2 MOTORS SETUP I ONLY HAVE ONE ENGINE. THERE IS ANOTHER COMPANY CALLED FLO SCAN THAT MANUFACTURE FUEL MANAGEMENT SYSTEMS, THAT MAKE BOTH ONE AND 2 ENGINE SETUPS.
FELLOW-SHIP [img]images/icons/wink.gif[/img]
Reply With Quote
  #5  
Old 05-02-2002, 05:02 PM
FELLOW-SHIP FELLOW-SHIP is offline
Senior Member
 
Join Date: Feb 2002
Location: Cooper City, Fl
Posts: 1,798
Default Re: Adding fuel senders

HA BARNACLE GIRL
YOU CAN TRY THIS WEB SITE FOR ADDITIONAL INFO AND COSTS.
http://www.brokenlegdave.com/
FELLOW-SHIP
Reply With Quote
  #6  
Old 05-02-2002, 07:49 PM
hermco hermco is offline
Senior Member
 
Join Date: Mar 2002
Location: Jensen Beach, FL
Posts: 827
Default Re: Adding fuel senders

BarnacleGirl,
Can't imagine someone installing tanks w/o senders can you see the entire top of any one of the tanks? Coast guard regs require that the sender and hose connections be accessable for inspection,there should have been an inspection plate installed over the senders and hose connections if there is such a plate and no sender you can use a flashlight and a mirror to see the rest of the tank and check for senders.
d.h.
Reply With Quote
  #7  
Old 05-03-2002, 12:41 PM
squidrig squidrig is offline
Member
 
Join Date: Apr 2002
Location: Chatham, MA
Posts: 81
Default Re: Adding fuel senders

Hey Barnacle Girl, I know insanely cheap/discount marine electronic website you might want to check out for those fuel gauges/management systmens www.bethel-marine.com down in Melbourne, FL. Good Luck.
__________________
Mish'n Fish'n
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft