Leaking floor scuppers

[Scott]

RIRED .. they are actually molded into the hull (the 23)... a picture would help alot right now but I don't have that shot....Its only a slight wedge maybe 3-4" wide about 5-6" long one end tapers to a point(towards the bow) and the other end is maybe 3/8 to 1/2" high (towards the stern)

JonG's suggestion might be a whole lot easier to accomplish

The other way would be to go out through the transom or hull sides

[ February 26, 2003, 05:30 PM: Message edited by: Scott ]