hull to deck and inner liner

[BUNKER]

UNFORTUNATELY I AM PRETTY SURE THAT SCREWS WOULD ONLY BE SHORE TERM REPAIR. THIS BOAT NEEDS COMPLETE RECOATING (GEL OR L.P.) AS WELL AND WOULD NOT WANT TO EVER HAVE TO READDRESS THIS ISSUE. AS FAR A DOLLARS GO I WOULD HAVE TO STOP AT 2,000 AND THAT IS ABOUT 500.00 HIGH, BUT THIS IS THE MODEL I HAVE BEEN LOOKING FOR. LINER REMOVAL WOULD ALSO ALLOW FOR ANY STRINGER REPAIRS AND POSSIBLY PUTTING THE TANK BELOW DECK, JUST A THOUGHT.

[jw]

My 20ccI/o had the same liner problems. The problem is that SC used wood strips to make up the height differencefrom the top of the stringer to the bottom of the liner, then put a thickened resin to glue them together. The resin broke, I cut foam strips and laminated them with epoxy fillets then glassed it around the inside of the engine well to the top of the stringer. Strong as hell now.
You may as well plan on putting a transom in it. I saw no reason , on my rig to remove the liner, the deck is firm , I just had to recore all the hatchs, btw, my tank is in the hull.
My 4 cents worth.
JW

[ScottM]

Bunker,
Is this the boat you're looking at?

http://adcache.boattraderonline.com/6/1/2/45913512.htm

[FOR-ROCH]

I am considering buying a 300 dollar , 1967 , 20' cc outboard seacraft . It has the same liner to gunnel disconnection problem . It also needs a transom and stringers seem crappy at transom . Could you be a little more specific and or clear for a beginner about how you would fasten liner to hull when it is already bonded in places ? How much should aperson pay to have stringers and a new transom installed ? How about some info for a brginner ? Thanks -

[Trayder]

There was no 20 CC in 1967??

Most inner liners are bonded at the bottom of the deck to the top of the stringers and then bed with 5200 and rivits/screws when the rub rail goes on. Some companies take it a step further and glass the inner liner to the hull and deck cap, if there is one.