|
|
|
|
#1
08-21-2003, 04:53 PM
|
|||
|
|||
Re: Painting outboard
Thanks! I just came to the conclusion that the last thing I should do is allow some more milestone creep into this project... Otto will be done with 3 boats before I finnish this one....
Gray car polish [img]images/icons/grin.gif[/img]
__________________
Surf and Boat fishing for Striped Bass http://striped-bass.com/images/sb_small180b.gif 
|
|
#2
08-21-2003, 07:55 PM
|
|||
|
|||
|
Re: Painting outboard
I would strongly suggest using 2 part Imron or Imron knockoff. Prep The engine with Zinc primer (the green stuff), a couple of coats are required. Stay away from the spray in a can. You would be suprised how good the engine will look with the proper prep and 2 part paint. Remember to grind any oxidation and with the proper paint the engine will look like you just popped it out of the box. I have gone so far as to paint the powerhead but you must strip all the electrical off. Looks cool!! [img]images/icons/wink.gif[/img]
|
|
#3
08-26-2003, 02:14 PM
|
|||
|
|||
|
Re: Painting outboard
JohnR is your motor Gray now ? or is it a complete paint over ? I went to the Body shop here to see if I could get YA THE PAINT buuuttttt THE computer WOULD NOT GIVE Us YAMAHA'S secret PAINT CODE.YOU HAVE A 91 ? Scream'n reels'
Be patient with My follow ups.My New computer just came in gotta build it,My New GATEWAY has some kinda critter in it ? Getting it FIXED,I think theres a theory on the internet being DOOMED !! [img]images/icons/cool.gif[/img] [ August 26, 2003, 01:17 PM: Message edited by: Capt. Brad ]
__________________
http://www.frenzie.com/frenzielogoline.GIF www.frenzie.com http://www.frenzie.com/custom.htm "Classic SeaCraft" Lures 1983_seacraft_master_angler.]htm My wife and I had words, But I didn't get to use mine."?"
|
 |
|
|
Hybrid Mode
