![]() |
|
#1
|
|||
|
|||
![]()
Capt Brian.....cant wait to see the BOAT !!!!
Personally I would do as JohnR suggests....resize the pictures using some kind of software (I use the Camedia software) then attach them to an email separately (I’m not familiar with the in’s and out’s of AOL)..... As I'm sure your aware you cant attach pictures to this site directly....Trayder has to do that .... Or JohnR can put them up on his site that he hosts.....Third option is to get an account at www.fishingworks.com or www.Imagestation.com (they are both free) upload pictures there and then link them to the site...just like this ![]() ![]() These were taken with an Olympus 3.3 mp camera (one with a U/W housing of course [img]images/icons/grin.gif[/img] ) and resized using the Camedia software and attached using Imagestation (only bad thing is that these sites will resize your image to a standard size as seen above) Once you get the hang of it …it’s a great way to share pictures….I’m very pleased with the camera |
#2
|
|||
|
|||
![]()
Hey Scott - tell me about that underwater housing please....
thanks, John
__________________
Surf and Boat fishing for Striped Bass http://striped-bass.com/images/sb_small180b.gif |
#3
|
|||
|
|||
![]()
John .... I have to go right now ....but will fill you in later ... pic's and all !!!! [img]images/icons/wink.gif[/img]
|
#4
|
|||
|
|||
![]()
John R,
Check out www.digideep.com once on the site, go to the list of underwater housing manufacturers and select the brand of camera that you have (not EWA-Marine!!). The Ewa bags work but the rigid housings are more durable and take UV abuse better. Most of these new housings for the consumer digital cameras are really cheap compared to what the 35mm housings run. Once you have found the exact housing you want, see if B&H in NYC has a better price or not. Good luck/ mark |
#5
|
|||
|
|||
![]()
Briguy ...any Luck ??? I want to see that transom work/and engines !!!!
John The housing I have is an Ikelite U/W housing rated for a depth of 200 feet .... Its built to house the 20xx,30xx, and 40xx series of Olympus cameras.... There are a few other manufacturers including Light and Motion Tetra , and the Olympus PT-010 .... the Tetra (is cast out of aluminum..2 or 300 foot rating) is over $1,000 and the Olympus (depth rated to 98 feet) is $300 the Ikelite falls in the middle....Its a very well built housing !!! the picture shows the housing plus an add on lens and an external strobe ![]() and these are a couple of pics that were on the card and taken using it Napoleon Wrasse ![]() and a couple of Clams ![]() |
#6
|
|||
|
|||
![]()
Thanks guys - I'm looking to go to 6-8 feet and get some shots of some of the holes I fish [img]images/icons/grin.gif[/img] - I failed my test dive - problems with the ears as a kid and can't equalize for crud now....
thanks for the info...
__________________
Surf and Boat fishing for Striped Bass http://striped-bass.com/images/sb_small180b.gif |
#7
|
|||
|
|||
![]()
John,
One thing you will have to be careful with when using a housing for a consumer digital and using the built-in flash on the camera is what is referred to as "back scatter". Because the flash is in line with the lens, you will potentially have images that look as though it is snowing (all of the particles in the water lit up by your flash). Unless you have a flash on a bracket like pictured above, you can pretty much be guaranteed of this effect. Just something to be aware of/ mark |
![]() |
|
|