![]() |
#1
|
|||
|
|||
![]() I lost the measurements I took of the tank before I epoxied it and re-installed... I think the capacity is 65-75, but want to know exact. What is the gallon capacity of a stock/original 1975 23' Tsunmai w/ an I/O ? Thx... |
#2
|
|||
|
|||
![]()
I had a 1977 Sceptre I/O and if memory serves me right it was an 85 gal tank with 72 useable. Somebody that has one will probably chime in.
|
#3
|
|||
|
|||
![]()
My '75 Sceptre inboard has a 72 gallon originally but it was squashed in and in my opinion too tall at the fill neck, it was touching the bottom of the deck plate. I shrank mine in height a bit and lost 8 or 10 gallons.
|
#4
|
|||
|
|||
![]() Thx for the response. When I re-cored my mushy hatch, I grinded a deep depression into the 3/4" ply wood directly over that pick -up; it was a concern of mine too. I just used a few extra layers of mat there. I have a nice clearance - no problem. I gues'timate my tank to be at about 70ish, but the # of 65 gals is in my brain for some reason !? |
![]() |
|
|