Ply deck under tank

[Trayder]

The way the seating in my boat works is as follows:


I have 2 Swivl Eze brand stanless steel deck plates mounted aft of my center console. They are thru-bolted in the deck.



Into these deck plates I have the option of putting 1 or 2 barstools. the barstools have the following fixture mounted to their bottom:




And the leaning post/rocket launcher I fabricated has 2 of them mounted to the bottom.


The Barstool uses one of these from the deck mount to the the fixture above





and the leaning post utiulized two of them.

The deck plates and the fixture under the seating is stainless and the posts are aluminum

All of the above pop on and off in 20 seconds and are all easily dissasembled.

Again my boat is under wraps so I do not have shots of the deck plates but I should be able to conjure up some photos of the leaning post and the barstools.

[dcobbett]

Trayder,

Thanks, I'd like to see more shots of your leaning post and single post seating.
I fish with a friend that re did a 22-2 Aquasport and put down 2 Todd plates (the kind that allows you to remove the posts) and built a leaning post around them. The only problem he has is the pop up cover plate is hinged and in the up position will cut a fly line, so he wraps the base of the post with a towel. The rig is very sturdy, which is what led me to ask about your installation. Here's the only pic I could find of the 22-2 install. You can just see the cover of the plate cocked up at at about 80^ in front of the post
[image][/image]

[ScottM]

dcobbett,
Nice SBFT. [img]/images/graemlins/cool.gif[/img]