Post or Seats?

Blue197320 · #1 03-24-2006, 07:30 PM

i dont see a problem with carpooling.

nestorpr · #2 03-25-2006, 08:19 PM

I just spoke with JorgeinMiami and he's going also so we may be able to share the ride. I would volunteer but my pickup is only a 2 seater.

Blue197320 · #3 03-26-2006, 12:42 PM

u wont want to ride in my mustang either.. basically a 2 seater also

Blue197320 · #4 03-28-2006, 12:14 AM

ok guys well i have a kinda retarded question about lean posts.. for those of u that have installed the lean post yourself, what did u use to secure it to the deck? thru bolts? or use big SS screws and epoxy to seal the holes or what? and capt. brad i would still like the measurements of the lean post u have in the MA so i can look for one roughly the same size for mine. thanks.

FELLOW-SHIP · #5 03-28-2006, 11:52 AM

SS Screws and 5200 in to my re did ½” plywood laminated deck. Now 4 yrs old and no problems.

FellowShip

_______________________________________________

My motto: Just for the Grins

Blue197320 · #6 03-28-2006, 06:09 PM

ok sounds easy enough.. i will be lookin for a lean post this weekened at flea market.

Miles Offshore · #7 03-28-2006, 09:01 PM

hey Blue- another alternative for you- i couldnt reach the undersides when i installed mine so I bought and installed those stainless t-bolts (1/4"-20 I believe)from west marine. I ended up using 2 in each leg and two screws in the other two holes. I used 4200 in the holes/threads and silicone under the legs themselves. Very solid.