plug lining

[hermco]

Here is a plastic type drain tube. No flanging tool required.
http://www.marineandmore.com/mp_stor...D=179/CATID=37

I would use the brass that will probably last for over a decade,

I replaced the origional brass tubes with
long ones bought from a whaler dealer, cut
them to lenth, used a flairing tool with
5200. Its been 12 years without a problem.

But the shop next door does metal machining so I am having them made from a block of Titanium with a flange for 1/2" mounting bolts! (Not)