85 project 23' here are some pictures

JT · #1 05-10-2006, 08:20 AM

thedink9 · #2 05-19-2006, 04:14 PM

JT

Tell us about the well you made for the transom. Is it plumbed? insulated? Any more pictures of it? Dink

JT · #3 05-20-2006, 10:13 AM

The livewell was popped out of a mold probably between 20-30 gal then glassed to the custom cap piece with the two boxes on the sides. The livewell piece was done by a guy that works at the boat builder where the boat is now. I had done everything myself up into that point, moving right along with the project, brought it there due to a barter/trade for some work I had done on the builder's house and it sat and sat....year goes by and here I am, lost interest and bought a Regulator. Long story, but the livewell is not done as you can see in the pic it needs to be finished glassed in and some fairing, the inside of the livewell is nice finished gel coat, there is no plumbing done yet. I am capable of finishing the whole project I did a sweet 20' 73 but I realize that the person who purchases has their own ideas and wants to customize it to their likings. Hope this helps it really is a solid clean hull with no blisters, spiders, issues.

JT · #4 05-26-2006, 07:54 AM

I will take $8000 w/out the new hyd. steering ram. Includes hull, trailer(exc. cond.), console, new tank, freshwater tank, new pop-up cleats, hawses, inner grab rail, steering helm, trim tabs, battery switches, all kinds of glass, mat, misc. hardware. The best is the messy grinding, cutting, fabricating work is done! Almost ready for paint even the whole bottom is done. Hope you all have a good 3 day weekend.772-486-0186

JT · #5 06-12-2006, 03:15 PM

Sold