first post! - Page 2

nestorpr · #11 08-07-2006, 06:47 PM

Let me know when you'll have the cabin door and the bulkheads out since I could use those for my boat. ALso the side coaming panels that cover the hull sides if they're in good shape. Hell, I'l even take a look at the windshield and side windows.

NoDoze · #12 08-07-2006, 09:48 PM

Botapete, everythings off excpet the bulkheads and side windows.
The doors are nice, its teak, screened with a removeable plexi insert.
Also have the original vinyl cushions for the cabin. A nice 70's brown little dirty, but nothing a scrubbing wont clean up quick.
No coaming panels on this one, was just carpeted. You didnt want to see what came out of that

Lots a teak trim pcs too

NoDoze · #13 08-07-2006, 09:52 PM

"You're a sick bastard Krispy"
Dont I know it John

, always the black sheep I guess

nestorpr · #14 08-08-2006, 01:14 AM

The door sounds nice! What trim pieces do you have?

NoDoze · #15 08-08-2006, 04:18 PM

Teak grabrail for passenger side, and teak rails creating the bulkhead shelf along the sides.
Also have the aluminum bowrail, if anyone needs one for a 20'
Anyone need a complete Volvo Penta QA145 and outdrive?

Bigshrimpin · #16 08-08-2006, 04:32 PM

Put it on Craigslist . . . I've seen similar volvo AQ series combos selling for about $800 - $1000. Which drive do you have? 270 or 280 ???

nestorpr · #17 08-09-2006, 03:12 PM

How much and does it run??

oldbluesplayer · #18 08-09-2006, 06:14 PM

NoDoze -

Teak grabrail for the passenger side - talk to me -

I've been looking for something like that - a pic, maybe?

Where did it mount?

Thanks
Bill

NoDoze · #19 08-10-2006, 01:36 PM

Hi all,
the teak rail is a 2 handed model, thats mounted horizontaly in front of the passenger seat at the top of the bulkhead.
I just got a new camera, its charging, so Ill take pics 2night.
The motor ran, when I bought it a few weeks ago. I was told they did a compression check and all was good. Thats pretty much what I know, as I never intended to keep it or know much about i/o's. Everything comes with it, controls, steering etc, whatever you want.

Just looking for DOUGHnations to the project, and see the parts go to goood use to fellow SC owners.
Also have a teak swim platform, orig. aluminum rub rail and the origianl head-unit w/ all the plumbing.
I think there may be a fresh water tank under the floor too.

nestorpr · #20 08-10-2006, 07:44 PM

I'm really interested in the whole engine setup, it may get me going for a little while until I can get a newer setup. Now I have to figure out when I can come up your way to get it. Where are you located? I'm in Miami.