Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-02-2006, 08:11 AM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default Re: WOT speed on a '83 20' SF w/200

Quote:
I'm pretty sure the 2.5L Spark Advance acts like a rev limiter and automatically retards the timing once you hit 5800rpm (2.0L/2.4L mercs the spark advace module will retard the timing @ 5600rpm) People will often remove those units and manually set the timing up to 24/25 degrees.


I already disconnected the timing module, now I'm experimenting with max advance. I Already did this on the 150XR4 on my flats skiff and picked up 5 mph top end and had to go up an inch in pitch on the prop to get the revs back below 6000.

I'm still not sure what is a safe max advance for a motor turning under 6K. The guys advancing 25 deg. are running well over that. One mechanic I talked to said 21, another said 23. We'll see.
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft