rivet holes

[VirginIslander]

I like the shipping tape thought....I think you could cut a small piece of shipping tape big enough to cover the hole, then stick it glue side to glue side on a bigger piece and then tape it over the hole.....that would be like taping plastic wrap over the hole.

I use the clear "shipping" tape to cover holes and then use thickened epoxy to fill them. Works great!

You don't have to go to the trouble of sticking one smaller piece to a bigger piece. Just stick a piece of tape over the hole and smush the poxy in from the other side. A quick wipe with acetone or goo-gone takes the stick'm off if there is any after the tape is peeled. ... Just be sure to clean out the hole and counter sink one side (a little on the second side is even better) for the poxy to get a good bite on.


Darlene