water over transom

jobu · #1 06-09-2007, 10:26 PM

I have a 23' Sceptre and recently noticed a little more than a neusense amount of water coming in over the transom and also notced the drain holes don't seem to be low enough to drain quickly. I was reading the post about the rolling in an 8' see when the writer made note of this too.
What is the easy way to remedy this?
Also I have two cylinders glassed into the stern. They look like coffee cans with spark plugs coming out the top.(hehe) What are they for?

1bayouboy · #2 06-10-2007, 10:20 AM

Pictures........

You must have an old spec ops boat with the self destructs....

jobu · #3 06-10-2007, 11:07 AM

It's an '88 hull

NoBones · #4 06-10-2007, 01:02 PM

Probably glassed in transducers, just my quess.
Look on the bottom of the boat below the "Cans"
Ken

jobu · #5 06-10-2007, 07:05 PM

That's what I assumed...nothing below area though, pretty smooth.

NoBones · #6 06-10-2007, 08:29 PM

OK, scratch that.
There was a time when guys would glass in speakers.
"Boom Box" so to speak. It was to help raise fish.
Take some pics if you can.....
Ken

jobu · #7 06-12-2007, 11:05 PM

Ken, I have posted some pics under "repairs and mods"
Look for me...also have some funky iron ribs, ballast thingy going on too. Check it out.
Joe