Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-31-2007, 08:14 PM
Capt Chuck's Avatar
Capt Chuck Capt Chuck is offline
gucci
 
Join Date: Aug 2003
Location: Sailfish Capital, fla
Posts: 2,804
Default Re: Questions for spetre owners

Makoman

"Hermco" would be the guy to ask for advice. You need to get those batteries above the deck!!
But here is a couple ideas you could do and still maintain your floor configuration.

The original floor scuppers were glassed in. The floor holes were sleeved 90* out thru the transom



Before I enclosed my transom, I built a gutter system by spliting PVC pipe in half and glassing it around the inside edge of the deck hatch.The water run-off was funneled to the floor scuppers.



The only problem here was the floor hatch had to be modified so it fit tight against the splashwell. You will see in the picture the "curve" to the back side. Then the hatch was hinged to the splashwell.
__________________


1978 23' Superfish/Potter Bracket 250HP --------



as "Americans" you have the right to ......
"LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
Reply With Quote
  #2  
Old 01-01-2008, 01:33 PM
abl1111 abl1111 is offline
Senior Member
 
Join Date: Feb 2003
Location: long island, ny
Posts: 1,053
Default Re: Questions for sceptre


Makoman, You raise a great question.

I have a '75 Tsunami w/ an IO. I have a hatch between the helm and passenger seat that needs to be water-proofed as it is the only place that allows rainwater to get into my bilge area. My bilge would be dry as a bone other wise.

I would want to make the deck/hatch seam totally water- proof.

Making the the 'gutter/drain system' the way Capt Chuck did is great if you can let gravity drain to the scuppers. I have the 'ole thru-the-floor scuppers so my drain water would have to be plumbed w/ a pump to get it up and out.

Any ideas ?
Reply With Quote
  #3  
Old 01-01-2008, 04:24 PM
riptide riptide is offline
Senior Member
 
Join Date: Nov 2007
Location: N.J.
Posts: 158
Default Re: Questions for sceptre

The only problem I see with the gutter/drain system is it getting cloged easily.I shark fish alot and the deck gets pretty nasty with fish guts and all.
I was thinking about moving the batteries into the the storage compartment between the seats and then sealing up the hatches and cutting in some TH marine sure seal hatches for access.I don't want to rely on bilge pumps to remove rain water or nasty wash down water.Everything should go out the scuppers.
Keep the ideas coming. Thanks
__________________
77 Sceptre 250 Suzuki
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft