Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-04-2008, 11:45 PM
3rdday 3rdday is offline
Senior Member
 
Join Date: Nov 2007
Location: FL
Posts: 454
Default Re: Scupper Question

I do not like this type of scupper. They only work well when the deck and drain tube exiting the hull is well above the waterline. You will be walking in a swimming pool, you will have to get the boat on plane to evacuate. been in lots of flats boats with them. The ball seems to always float to top sealing the oriface. I prefer the horizontal style that have ping pong ball in them with silicone diphragm. They mount outside the transom you can also push the ball into the diphragm and it will work like a plug. These will work well even if your drain holes are on the waterline or very close or even well above.
__________________
I heard it on the coconut telegraph..........
Reply With Quote
  #2  
Old 01-05-2008, 12:42 AM
reelclassic reelclassic is offline
Senior Member
 
Join Date: Jul 2007
Location: homestead Fl
Posts: 271
Default Re: Scupper Question

what caught my eye was this-----For use when discharge is below waterline------I do not plan on raising the deck its going back to the original height/level! Thanks for the input thought they might work!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft