![]() |
|
#1
|
|||
|
|||
![]()
And which prop are you running......just changing your prop could get you to WOT. I gave up some top end and a little efficiency to get my merc/bravo to the right WOT range....which crazily of you ask me....on the 350 MAG MPI Horizon is rated to 5200RPMs!!
|
#2
|
|||
|
|||
![]()
Thanks for the input....I was trying to do the math in my head and was assuming, maybe incorrectly, that the 1.65 ratio would give me a little more low end which is much needed for the weight of the boat.
I am running a 15x17 alum prop which seems to perform well...just keeps me a few hundred rpm shy of max wot. I am more interested in overall performance rather than speed so looks like I will stay with the same dia/pitch this season. Thank you both for your reassurance and input |
#3
|
|||
|
|||
![]()
The 1.65 is engine rev to 1 prop rev. So the lower the ratio the less prop pitch you can usually turn. Bravo 3 drive with 22 pitch props are more like 2 or 2.2.
|
![]() |
|
|