Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-21-2009, 11:00 PM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default Re: another repower question...

The one metric you should keep an eye on with a heavy motor is min planing speed. These boats will plane at 12 mph with a 300-375 lb motor because that's what they were designed for. Mine will even do that with the 427 lb E-Tec and a 30" setback bracket, but it took a stern lifting prop and Doelfin to do it. A 500 lb motor will probably hurt min planing speed and ride.

A 150 is plenty of power - my Seafari, which is several hundred pounds heavier than the cc's, will run low-mid 40's with very heavy load and all the canvas up. Will hit almost 50 with light load and the top down. Will average 4 mpg heavy, 5 mpg light at about 3700/27 mph.
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg
Reply With Quote
  #2  
Old 04-27-2009, 02:20 PM
2182 2182 is offline
Senior Member
 
Join Date: Jul 2008
Location: charleston, SC
Posts: 209
Default Re: another repower question...

thanks guys. im hoping my merc lasts forever but the previous owner yanked a bunch of stuff of it so shes a bit finicky. when shes running strong itll go low-mid 50s but i rarely push it that hard. it is nice to be able to outrun a storm (or a skiboat) when need be though.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft