Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #26  
Old 05-01-2009, 09:42 PM
lost2a6 lost2a6 is offline
Senior Member
 
Join Date: May 2003
Location: Hurley, Mississippi
Posts: 386
Default Re: Porpoising Seavette

A little up date, Brett at BBlades sent me a couple of test propellers. He sent me the Mirage plus 21 pitch and a Bravo 1 22 pitch 4 blade.

Here are the results with the Mirage plus: 3000 RPM=30 MPH, 3500 RPM=40.5-41 MPH, WOT=5200 RPM @ 64.7 MPH with drastic porpoising. Even at 30 MPH with the drive all the way down it still wanted to porpoise.

Next I switched to the Bravo 1, those results are: 2800 RPM=30MPH, 3500RPM=42.5-43MPH, and WOT=5200RPM @ 63.2MPH with not near as much porpoising. I can even cruise @ 30MPH and trim the drive up some and it doesn't porpoise. Even though I lost a little MPH on top end with the Bravo1 it is by far the best all around prop for my boat. So what Brent wants to do is to Lab finish a 24 pitch Bravo1. He said that I should get more MPH out of it than the Mirage plus and that I should see 66-67 MPH. I told him to get after it.
__________________
Steve B
1978 23ft SeaCraft Seavette 502HP ZZ502 Mercruiser TRS Drive-Sold-UGH!
1998 28ft Carolina Classic 7.4 Volvo Penta Duo Prop
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft