|
|
|
|
#1
06-03-2009, 07:52 AM
|
|||
|
|||
Re: 1977 23' refit in 2007
Way to go Josh. Thats one nice lookin boat! Does it not have trim tabs now?
__________________
__________________________________________________ ________________ 1974 23SF 
|
|
#2
06-03-2009, 11:45 AM
|
|||
|
|||
|
Re: 1977 23' refit in 2007
Donnie has the 12x12 bennets,wired to console, but not on..took them off for the restoration and with a bracket in place the cylinders do not fit. its a well discussed topic i see
 here on CSC, so gonna mull it over before I drill any holes. options i see--move to inner strake not ideal but see some have done on site -outer strake and call bennett about a shorter cylinder they make 2 lengths, maybe can make custom shorter -outer strake and cut hole in bracket -toss aside and go volvo ql system I am not gonna remove the bracket if that is entailed in cutting a hole. Probably call Bennett first with a measurement and take it from there.
__________________
--------- 1977 Seacraft, Armstrong Bracket 275(chipped 250!) Verado Merc Rev 4 17P
|
|
#3
06-03-2009, 07:15 PM
|
|||
|
|||
|
Re: 1977 23' refit in 2007
Josh sweet boat. I have a 79 in Fla and an 84 here on Cape Cod. i go out of Barnstable Harbour My boat has bracket with trim tabs mounted on the outer edge of the transom Work well. If you need pic to see were they were mounted just let me know. Tuna should be in soon so you better get on it See you on cape cod bay Carlos
|
 |
|
|
Hybrid Mode
