![]() |
#24
|
|||
|
|||
![]()
Still sanding and fairing the console. I decided to start work on the radial transom cap and started building the mold out of some 2 x 12's and hardi board. Still in the garage but hopefully it will warm up soon.
![]() From Strick's post "Here we go again" I've gotten plenty of ideas for this including the sculpting compound to use. ![]() I started the layup and used 2 layers of 1.5oz matt, 2 layers of 1708 and a layer of woven roven. After I get the fit right I plan on coring it with either coosa or divinycell where the rod holders will be installed. ![]() ![]() Breaking the mold. Almost like Christmas morning!! ![]() ![]() It's not perfect but I definitely think I'll be able to get it to work out. ![]()
__________________
Will |
|
|