Tsunami Prime etc.

[McGillicuddy]

That's a nice color. Stick with the white boot stripe. Much cleaner look...
Regarding bottom paint, I think Bushwacker said the Signature finishes held up very well to his month(s) long submersion tests... Don't know the cost or difficulty in application...

[DonV]

I used it on my transom after the rebuild because of Capt. Chuck's high recommendation. At first I thought it was a bit expensive, he sells it more by the square footage you are covering than volume. It went way beyond the square footage I was expecting with four coats. It's actually very easy to apply when you get the hang of it after the first coat. Because I only painted the transom I did not polish the "orange peel" out of the surface, For my application it looks VERY good as it came out. It's all done with 3" rollers...a wet one to apply the paint and a dry one to smooth it out. Rest assured, Denny has done the research and if he's good with it......enough said. The one thing that you have to do is be able to measure in small quantities, actually was pretty easy after the first time.

[fdheld34]

Thanks for the info guys...I know Denny put several days and hours of labor into his bottom project with excellent results...and I know Tom sells a great product..
I just dont know if I have that kind of patience to get everything perfect plus the cost too..etc...but I will ponder it for a while.
-Fred

[Capt Chuck]

Fred

Drive down to So Stuart and get the Signature Paint from Tom. I'll come up and show you how to apply it

[fdheld34]

Denny..I emailed Pettit..lets see if they respond..after consideration..I am going to follow your lead on botom..

Chuck..I will take you up on your offer. email me with your telephone number at fdheld@bellsouth.net. Hopefully you are available this week after 5:30 PM sometime.(yes I have to work).and can make it up. I am going to call Tom this week for paint prices etc. ..hopefully you can come up and can give me some tips on my hullside finish too..here is my problem..
I have two coats of Easypoxy on hullsides already but I noticed some streaking from roller..mainly in front bow area. Looks ok .(but its bugging me!!)..might sand again and apply third coat..or sand all off (dont really want to!!!)..and bite the bullet and go with Tom's product and three step process Need your opinion when you see it.
-Fred

[fdheld34]

Here is one option for the bottom paint...black with white boot stripe...Any suggestions and ideas etc. appreciated.
I was going to continue the bottom paint top line even from stern to bow to keep in line with bootstripe..instead of having to tape waterline on bow bottom-Fred

[castalot]

looks good
are you going with bottom paint or just a black and are you going to do the seacraft bottom job
matt

[uncleboo]

That's the way I would go. It looks much better and, like you said, no waterline to tape off. Getting anxious?

[Bushwacker]

Fred,

Tom can match virtually any color if you know brand and name of the color, so I'm sure he could match the Easypoxy topside color (Ocean Blue?). I told him I wanted something to match my Sunbrella top color of Aquamarine which I used for bootstripe and bottom; he has the formula to match all the Sunbrella colors. I took him a plug I had removed for an access hatch to see if he could match the gel coat, and he absolutely nailed it. The stripe between bootstripe and bottom is that paint, also used on sides of steps. I believe it's called Hattaras White, which is actually an off-white/Ivory color that doesn't show dirt as bad as pure white.

[fdheld34]

Thanks Denny, just seeing if it is feasible to sand all off and start over...dried in better than I anticipated..but still a soft paint! Trying to line up a meeting w/ Capt Chuck to see what to do and then will run sample to Tom...etc. Again cost being an issue..but if done right the first time might come out in the long run!
.looks like you have a brand new trailer now
-Fred