|
|
|
|
#1
04-30-2010, 12:26 AM
|
|||
|
|||
Re: why we should not let our boats sit
on the solinoid you can jump across the big terminals to check it it is the solinoid - stick with Merc's though my NAPA -Sierra went out again in a year
__________________
Any way you measure it - dumbass is expensive 
|
|
#2
04-30-2010, 04:30 PM
|
|||
|
|||
|
Re: why we should not let our boats sit
well got the steering to turn left and right. the preesure gauge on top of the hydraulic tank has failed. it reads 20psi when there is none in it . put the pressure up to 25( found label on back side of can) and it works.
now on to the trim and tilt,i have a weak battery so i switched the one out of my other truck just to test it,now it goes up and down no problem. but i have lost my trim up button on f/r shifter. i can still raise the motor from the trailer button on the dash. will start ohming wires and switches to se what has failed. thanks for all the help
__________________
73 seacraft 80 merc my boat
|
 |
|
|
Hybrid Mode
