|
|
|
|
#1
06-10-2010, 12:21 AM
|
|||
|
|||
Re: Fuel tank compartment
My foam was on the sides only. It was also foamed around the fill hose from 4 inches below the cap to the front of the forward wall of the compartment. What a pain to get the hose out. But the tank itself was very easy.
|
|
#2
06-10-2010, 10:06 AM
|
|||
|
|||
|
Re: Fuel tank compartment
What is the best way to determine if you have an original tank from the 70's?
|
|
#3
06-11-2010, 01:00 PM
|
|||
|
|||
|
Re: Fuel tank compartment
they all have a sticker on top somewhere under the crud LOL - size - date of manu
__________________
Any way you measure it - dumbass is expensive
|
|
#4
06-13-2010, 02:17 PM
|
|||
|
|||
|
Re: Fuel tank compartment
My coffin box didnt have any drain in it at all when I took it out. I am going to drill a bunch of holes in the botom of mine before it goes back in the boat. I also put a layer of glass on my tank to create a bonded barrier between the foam and aluminum. I hope this will prolong the life of my tank.
__________________
1975 Seacraft 18SF w/2004 150hp Johnson 2-stroke on a 26" bracket
|
 |
|
|
Hybrid Mode
