|
|
#2
06-21-2010, 07:13 PM
|
|||
|
|||
Re: Gas Gauge
When you turn the key off does the needle stay pegged?
More then likely you have a bad ground wire on the tank. I just went through this with mine on the 20SF. After 19 years the ground wire corroded on the tab welded to the tank. I had to tap the fuel gauge to get it to return to "E" Hopefully you have an inspection port above the sender to check it.... Good Luck, Ken
__________________
See ya, Ken © 
|
|
|
Threaded Mode