Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 06-30-2010, 05:14 PM
cdavisdb cdavisdb is offline
Senior Member
 
Join Date: Feb 2006
Location: Sarasota, FL
Posts: 1,056
Default Re: odd crack in a 25 Seafari

The really strange part is stringer placement. I can see the other side of the boat and it is the usual massive seacraft construction. The stringer goes well past where the crack is and there doesn't seem to be anything around that would create a hard spot or anything else that could provide the opportunity for such a crack. I guess I'll just have to wait until I can get the bottom out of the storage compartent and see exactly what the crack looks like from the inside.

For sure, there was no sign of any crack when I bought the boat 9 months ago.

Entourage, were your cracks right on the stringer?
Reply With Quote
  #2  
Old 06-30-2010, 05:49 PM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default Re: odd crack in a 25 Seafari

Connor,
To me, it looks like the hull flexed and put the chine/strake in compression causing it to buckle in the area of the crack. I took a look under the deck of my 25 yesterday afternoon. The stringer runs along the step in the hull and goes well forward of the location of your crack. The stringers are vertical, but because of the deep vee, the force acting on the hull will have a pronounced lateral component that the stringer may not support. The stringer is not in contact with the cabin liner, and there's no bulkhead between the cabin bulkhead and the anchor locker, so it has no lateral support that might help it resist the lateral component of slamming loads where the crack occurred. I'll check again, but I don't think the stringers in my 25 are foam filled. I think they would be considerably stiffer if they are foam filled. I'll try to post pics, but my DSL is down at home and I may not have internet access there for a couple days. strick will probably have his pics up first.
Dave
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
  #3  
Old 07-05-2010, 10:40 PM
Entourage Entourage is offline
Senior Member
 
Join Date: Dec 2007
Location: Fairhaven Mass
Posts: 583
Default Re: odd crack in a 25 Seafari

Don't know i never cut it up to see. The crack was about the size of 2 thumbnails and never got any worse.
Reply With Quote
  #4  
Old 07-06-2010, 10:34 AM
strick strick is offline
Senior Member
 
Join Date: Aug 2003
Location: California
Posts: 2,738
Default Re: odd crack in a 25 Seafari

The stringers in my 25 are hollow. If the crack is inside the stringer then you are going to want to remove that portion of the stringer fix the glass underneath it and then re attach the stringer. Then make the necessary repairs on the out side of the boat.

strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany)
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft