|
|
#1
08-25-2010, 12:04 PM
|
|||
|
|||
Prop for 300 Etec?
Looking for some advice from other etec owners...i have a 23' CC with hermco bracket...300 HP Etec on the way and wanted to see what prop is suggested best for this application. looking for a balance of performance and stability....thanks for any advice!
|
|
#2
08-25-2010, 12:14 PM
|
||||
|
||||
|
Re: Prop for 300 Etec?
I'm running a 14 3/4 x 17 SS Viper. 5600 - 5800 rpms trimmed out depending on sea conditions & fuel weight.
Most prop shops let you try different props before purchase. Big difference between SS & Alumin 
__________________
   1978 23' Superfish/Potter Bracket 250HP -------- as "Americans" you have the right to ...... "LIFE, LIBERTY and the PURSUIT of a Classic SeaCraft" -capt_chuck
|
|
#5
08-27-2010, 11:14 AM
|
|||
|
|||
|
Re: Prop for 300 Etec?
I've got a 300 on a hermco bracket on my Tsunami. I'll give you the dimensions after checking this weekend but it's a 4 blade.
__________________
1973 23' Tsunami, 300hp Etec Norwalk, CT
|
|
#6
08-27-2010, 06:55 PM
|
|||
|
|||
|
Re: Prop for 300 Etec?
Hey LadyLuck,
I know this is not responsive to your question, but PLEASE post some performance numbers once you get the 300 mounted and up and running. I may upgrade to a 300 etec at some point in the near future........ thanx 
__________________
Steve 1978 20 ft. Master Angler (175 merc) 2000 23 ft. Seacraft (225 opti) 1984 17ft. Boston Whaler (90 merc)
|
 |
|
|
Linear Mode
