Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Performance
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-07-2010, 10:46 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Trailer set-up

I just want to make clear how important trailer set up is. My last boat was a 17 CC and seemed to pull very heavy on my Intrepid, moved it back 2 inches and made a world of difference as it had too much tongue weight.

My current 20 MA pulled by an Expedition has always pulled fine, although going over concrete slabs used on I States seemed to have sort of a pull back jerky feeling, of course I hadn't thought of it in 4 yrs and lots of miles.

Moved it forward 1 - yes 1", it lost all that jerky stuff on the slabs and according to the trucks computer actually picked up 2 MPG

Single axle trailers are very sensitive to weight distribution hence my 1". Tandom not so much and hitch hight makes a difference also.
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
  #2  
Old 09-07-2010, 10:57 PM
htillman htillman is offline
Senior Member
 
Join Date: Oct 2007
Location: houston, tx
Posts: 517
Default Re: Trailer set-up

Your are really correct. I purchased a tandem axle trailer for my 23 CC and have had a hard time getting it adjusted. I purchased a trailer one size larger than required and have had a difficult time getting it balanced. I am trying to find a scale so I can weigh the tongue weight before making any more adjustments.
ET
Reply With Quote
  #3  
Old 09-07-2010, 11:59 PM
Fr. Frank Fr. Frank is offline
Senior Member
 
Join Date: Oct 2003
Location: Shalimar, Florida
Posts: 2,265
Default Re: Trailer set-up

With a tandem trailer, the height of the top of the trailer frame needs to be measured between the axles as the frame is level. The top of the hitch ball on the tow vehicle should be the same height as the top of the frame height as measured between the axles. Lift the tongue too high and so transferring weight aft, and you get sway and greater braking difficulties. Drag the tongue too low, and you get asymmetrical tire wear, and tongue hop under acceleration and during braking. Both too high and too low will cost you in fuel economy.
Tongue weight on a tandem-axle trailer is not as critical as with a single axle, but should be between 4% and 7% of the total towed-vehicle weight. I generally shoot for 5%. Too little tongue weight is actually harder on your engine and tranny than too much tongue weight, because of the greater moment of inertia shift under acceleration.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes.

Fr. Frank says:
Jesus liked fishing, too. He even walked on water to get to the boat!

Currently without a SeaCraft
(2) Pompano 12' fishing kayaks
'73 Cobia 18' prototype "Casting Skiff", 70hp Mercury
Reply With Quote
  #4  
Old 09-10-2010, 03:46 PM
eggsuckindog eggsuckindog is offline
Senior Member
 
Join Date: Mar 2003
Location: Tampa
Posts: 2,354
Default Re: Trailer set-up

Yep tandoms are different and he's right about ball height probably being the biggest factor. Sometimes even trial and error may work best, easy to move the winch stand around, I don't think there is a standard for tongue weight, it depends on the vehicle as well.
__________________
Any way you measure it - dumbass is expensive
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft