![]() |
|
#1
|
|||
|
|||
![]()
I'll post pics when I can. I'm not doing the glass work on this boat. It will be done by a local professional. Transom re-cored, deck replaced, and all hatches will be re-cored. The rear bulkhead will have hatches instead of the bolt-in type doors. Transom to get more of an arch and cooler/fishbox. Interior will be painted. I have a Hermco bracket and McKee pogy pen ready to install. We will probably change the color and are considering Awlgrip Aqua mist. I believe Strick's 23' was this color. I stripped the boat and through bolted the cap with 10-32 SS screws, lock nuts, fender washers and 5200 as the cap and coring is fine. The next step is the glass man.
![]() ![]() ![]() ![]() ![]() |
#2
|
|||
|
|||
![]()
Lots of potential there! Was your boat originally a I/O or did someone enclose the transom and cap before you owned it? Aqua mist is a nice color choice.
strick
__________________
"I always wanted to piss in the Rhine" (General George Patton upon entering Germany) |
#3
|
|||
|
|||
![]()
This is the old "Her Paycheck" boat. The transom was enclosed and alum. bracket when I bought it 4 1/2 yrs. ago. That work was done in mid 90's. I could have probably waited several more years and patched a soft spot on the deck but.....
Thanks again for your help and I'm sure I'm not finished asking you questions ![]() |
#4
|
|||
|
|||
![]()
Are you switching brackets for twins or more flotation?
|
#5
|
|||
|
|||
![]()
Primarily flotation but it's nice to have options
|
#6
|
|||
|
|||
![]()
Been a while but here goes......I need to finish all the goodies
![]() I opted to go with hull vents and cut the holes before the glass man got the boat ![]() Deck cut out ![]() Transom replaced and tied in with raised stringers ![]() ![]() Fuel tank compartment rebuilt and new 118 Gal epoxy coated tank installed, no foam! ![]() ![]() ![]() I chose a large bilge access, 2 large bulkhead accesses, large baitwell/cooler. It's blue inside and could be plumbed. I have a McKee pogy pen for the serious live bait so this is probably cooler. ![]() Ice Blue Awlgrip with white, blue non skid on deck and white on cap areas ![]() The fish box is deeper with stringers taller ![]() ![]() ![]() ![]() I hope to get the Hermco bracket and motor on in ~ 2 weeks and then start wiring. |
#7
|
|||
|
|||
![]()
Really enjoyed following your rebuild journey.
I am currently looking for an older SC 23 Center Console to restore. I have been looking for over a year. Staying patient is getting harder and harder. I have really liked all you have done with your boat. Brad |
#8
|
|||
|
|||
![]()
Thanks bfox and keep looking. If I see one I'll pass it along.
|
#9
|
|||
|
|||
![]()
reelescape1 your boat came out great!!! I like your choice on the color, very nice work.
Now all you need to do is get that deck bloody. I hope you enjoy your boat all over again. |
#10
|
|||
|
|||
![]()
Thanks nate22!
|
![]() |
|
|