Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Repairs/Mods.
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-09-2011, 08:45 AM
Blue_Heron Blue_Heron is offline
Senior Member
 
Join Date: Jan 2006
Location: Gator Country
Posts: 1,416
Default Re: clean and wax

Quote:
where do you buy polyglow?
Try here, George:

Poli Glow

I'm sold on this stuff after seeing Bushwacker's Seafari. One kit will do your 25 and your 20. Wet sand with 800 or 1000 grit until you get through the oxidation. Make sure you remove all stains. If you don't, Poli Glow will just coat them and make them shiny stains. If you can't find 800-1000 at your home improvement store, try the auto parts store by the touch-up paints.

GodsReel,
It's made for gelcoat, but I don't know why it wouldn't work over paint. It's an acrylic emulsion that leaves a thin film with each pass of the applicator. That's why it takes 5-6 coats. So I wouldn't think it would react with the paint.

Dave
__________________
Blue Heron Boat Works
Reinventing the wheel, one spoke at a time.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:05 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft