|
|
#6
04-11-2011, 12:38 PM
|
|||
|
|||
Re: engine on center stringer
If you move the transom assembly up, you also elevate the ventilation/cavitation plate on the lower unit. You need to check that data, too, to make sure you won't ventilate the prop in rough water or in turns should you go that route. Sometimes raising the transom group just won't work.
__________________
Common Sense is learning from your mistakes. Wisdom is learning from the other guy's mistakes. Fr. Frank says: Jesus liked fishing, too. He even walked on water to get to the boat! Currently without a SeaCraft  (2) Pompano 12' fishing kayaks '73 Cobia 18' prototype "Casting Skiff", 70hp Mercury 
|
|
|
Threaded Mode