![]() |
|
#1
|
|||
|
|||
![]() Quote:
|
#2
|
|||
|
|||
![]()
What's the reasoning behind buying a new tank if the tank that is being repaired is 99.9% corrosion free and the job is being done by professionals?
As far as the baffles, they are going to slot weld them. If there is a reason then I'm not opposed to dropping the extra money, I just don't see one. |
#3
|
|||
|
|||
![]() Quote:
__________________
1977 SeaCraft 23' Sceptre W/ Alum Tower & Yamaha 225 www.LouveredProductsUnlimited.com |
#4
|
|||
|
|||
![]()
Respectfully,
I think the concensus is obvious. You have heard from some of the most experienced guys on the site - what they would do. If you ask enough, I'm sure you'll find someone to agree with what you want to hear - I've done that myself at times - bucking the majority. Sometimes it works out but usually I realize I have wasted a lot of time and end up doing what the concensus originally recommended In the end, you weigh-out all the advice you receive - and do what you think. Good luck ! |
![]() |
|
|