Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > General
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 11-14-2011, 01:54 PM
evknot0127 evknot0127 is offline
Member
 
Join Date: Jul 2011
Location: Delaware
Posts: 43
Default

thanks everyone i had the boat out again yesterday and we had solid three footers maybe four at times and the boat ate em up like cotton candy...performance numbers- cruise speed is about 26 knots at 4700 rpm...wot- upper 30 knots the motor gets about 5.5 mpg at crusie speed (also depends on water conditions) ....did find a little problem with the boat tho.....believe i have a small leak somewhere...anyone have any experience with how to find it? i was going to take console and tilt it to side remove coffin lid and back the boat down in the water but leave it hooked to trailer and get down underneath with a flashlight and see if i can find it...??? any help would be great
Reply With Quote
  #2  
Old 11-14-2011, 04:03 PM
Bushwacker Bushwacker is offline
Senior Member
 
Join Date: Feb 2007
Location: N. Palm Beach, Fl.
Posts: 2,456
Default hull leak?

Quote:
Originally Posted by evknot0127 View Post
........believe i have a small leak somewhere...anyone have any experience with how to find it? i was going to take console and tilt it to side remove coffin lid and back the boat down in the water but leave it hooked to trailer and get down underneath with a flashlight and see if i can find it...??? any help would be great
It may be your brass scupper tubes if you have the Potter type that go straight down thru the bottom. Take a look at the flare where it goes through the bottom; the brass flare corrodes over time and pieces of the flare break off so they're no longer water tight. Gillie and I both did some posts several years ago on how to replace those tubes. Denny
__________________
'72 SeaFari/150E-Tec/Hermco Bracket, owned since 1975.
http://i188.photobucket.com/albums/z...Part2019-1.jpg
Reply With Quote
  #3  
Old 11-14-2011, 06:05 PM
evknot0127 evknot0127 is offline
Member
 
Join Date: Jul 2011
Location: Delaware
Posts: 43
Default

the only thing on the boat that is through hull is my fish box drain...but i do also have a bildge that is hooked in order to serve as a raw water washdown or to pump water to a livewell....as for scupper tubes? i do not believe i have them..my scuppers are just two holes in the back where the transom was raised...no tubes go to them at all if that is what you were reffereing too...newbie here i def could be wrong
Reply With Quote
  #4  
Old 11-14-2011, 06:53 PM
waterhazerd waterhazerd is offline
Junior Member
 
Join Date: Oct 2011
Posts: 8
Default

fill the bilge with water at home and see if something is leaking
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft