|
|
#8
04-29-2012, 07:40 PM
|
|||
|
|||
Hey hermit, thanks for looking. The house sits on the console in a bed of 5200. Then the seems were taped with epoxy. Check out my post on 4-19 you can see it before i mounted it. The console has the original flange and the previous owner glassed in the inside. The Wheel house seems were all taped and epoxy the rest was wet out with epoxy. This is the 3rd one i've built and had good results with this method. The wheel house is 5\8 ply
|
|
|
Threaded Mode