|
|
|
|
#2
07-05-2012, 02:22 PM
|
|||
|
|||
Thanks, I do plan on keeping the shelf. I will angle it so it will be closer to level when I redo the boat. Right now, anything I put on it slides off!
 The holes were in the windshield when I bought the boat, so, I just reused the holes.
__________________
1975 SF18/ 2002 DF140 1972 15' MonArk/ 1972 Merc 50 http://i833.photobucket.com/albums/z...photos/SC3.jpg 
|
|
#3
07-21-2012, 03:58 PM
|
|||
|
|||
|
Fianlly some clear weather..
Cut out old bad wood on bow area and replaced with new wood. 2 layers 1.5 oz mat 1 sheet 1/4" ply 2 layers 1708 will finish up with another layer of 1708 grind bevel and 1708 tape for edges then fair out, prime and paint. attached pictures
__________________
"...Southern by the grace of God"
|
|
#4
07-22-2012, 03:40 PM
|
|||
|
|||
|
Microballons
Rain delay so I thought I would ask a question.
Can microballons be mixed into a 2 part epoxy primer. I do not have a real high build primer so I was thiking of adding microballons to my existing 2 part primer...will this work ok to create a real high build primer??? Thanks fo all the input/help in advance! -Fred
__________________
"...Southern by the grace of God"
|
|
#5
08-04-2012, 06:28 PM
|
|||
|
|||
|
Today I got some more fairing done on the bow and recored all hatches. I also filled in some more topside holes including front rod holders etc and primed the sole..next I will finish sanding/fairing and rest of priming...followed by finish coat for interior.
Some attached pictures...it has been real slow going due to rain every afternoon and also the darned heat!!!
__________________
"...Southern by the grace of God"
|
 |
|
|
Hybrid Mode
