rolling gel coat?

[DonV]

I'd roll Kiwi-Grip.

[eggsuckindog]

Originally Posted by DonV

I'd roll Kiwi-Grip.

cool - I have a neighbor thats an expert

[Normagain]

Originally Posted by FishStretcher

Short nap rollers. Some 3/16 or 1/4" nap. Try some foam ones but make sure they don't dissolve first. And don't roll too much. It needs time to self flatten before it kicks. Ask me how I know.

Curious if you added something to help the gel coat self flatten, patch aid, Duratec Hi Gloss, etc.? Doing my transom outside, floor and inside hull sides only so I'm curious how it worked out for you.

[hugo]

the problem is doing the outside transom is its not laying flat and i think if i add somthing to thin it it will defintly run if rolled on, im trying to get what i need to spray it for now, or im just going to have to keep rolling and sanding untill its thick enough.

[jorgeinmiami]

Hugo

I have a small compressor that I used to paint mine with that you are welcome to use anytime

Jorge

[hugo]

thanks jorge,

i have one, i am stopping at northern tool today to get a water seperator and spray gun, hope i can shoot it sunday, kids have a birthday sat so we will see if the weather holds out.