Classic SeaCraft Community  

Go Back   Classic SeaCraft Community > General Discussion > Boatbuildercentral.com
FAQ Community Calendar Today's Posts Search

Notices

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-02-2012, 11:33 AM
shine shine is offline
Moderator
 
Join Date: Sep 2010
Location: Vero Beach, FL
Posts: 597
Default

deck is glued down and the topside seams are rounded and glasses (will upload those pictures later)













I forgot to epoxy the backing pates under the deck, so the eyelets will have to be mounted out to the edge where there are cleats to help hold screws. She is still very light Hope to water test it this weekend
Reply With Quote
  #2  
Old 08-02-2012, 11:34 AM
shine shine is offline
Moderator
 
Join Date: Sep 2010
Location: Vero Beach, FL
Posts: 597
Default

taped the top and bottom seams with 6 oz tape, covered deck with 4 oz cloth.

Sanded the tape edges so that it will be easier to fair. Glued some fins on. Next will fillet around the fins then give the entire outside a coat of epoxy.






Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
All original content © 2003-2013 ClassicSeacraft