#11
|
|||
|
|||
Quote:
A young dumb son of a friend thought about becoming a male stripper. We brought him there for as long as he could stand it. We made him turn around and contribute to her dance. Less than an hour of our time, GFS CALL EPIFANES, or just call me as I learned a tad. Don`t go finer than 100 max. Need tooth for the varnish to hold. I would like to see some sticky threads so folks can get tons of wildly researched thoughts on the best appproaches to everyday questions. Cheers, GFS |
#12
|
|||
|
|||
Go look for Marine Stripper at the local Sherwin Williams...Blue label, gel & wear gloves and long sleeves and blow the vapor away from you. Works like a champ. About $25 gallon...Probably $70 at Jamestown Distributers
FranMar had a product called Soy Stripper that had great reviews in Practical Sailor. Here's a link to some canuck stuff: http://m-tc.com/efs2500prod.htm Good luck
__________________
there's no such thing as normal anymore... Last edited by McGillicuddy; 08-02-2012 at 03:08 AM. |
#13
|
|||
|
|||
So I spent a little time with my Ryobi DA sander with 120 grit. It came out well but I would probably go with 80 or 100 grit next time. I used a dremel with a little sander wheel on the inside of the rod rack.
I was so sweaty I didn't wear my eye protection as it kept fogging up. Big mistake. I got some sanding derbis in my eye. It took me all night to get the piece out. Darn my eye was crusty and nasty the next morning. (no pic of that) Before and after pix.
__________________
Capt. Brian |
#14
|
|||
|
|||
I like the idea of hiring a stripper to give me a lap dance while I drink a beer before making such important decisions.
|
#15
|
|||
|
|||
Peanut island on the nice weekends, lots of them there!
I also here there a quit a few around beauford SC during water fest! |
#16
|
|||
|
|||
Long drive from NY for a lap dance.
|
|
|